Orchard Electrical Services
Your Cart is Empty
There was an error with PayPalClick here to try again
Thank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart
|Posted on April 20, 2016 at 7:09 AM||comments (31)|
How many people have undertaken DIY around the house, using an online "how to" video as a guide? There are something like three million of them around, covering just about every possible project you could want.
The fact is, though, that some of the DIYers who post their "expert" advice don't always know their stuff. Some of the video guides out there are not just unhelpful, they can actually put you in danger.
Research by the charity Electrical Safety First found that around one in 12 people who undertook electrical work using an online video as a guide ended up either causing damage to their property or having to pay for costly repairs because the advice they followed was wrong.
Furthermore, one in 10 of those people had experienced an electric shock while carrying out the work.
To highlight the issue, Electrical Safety First have released a series of mock "how to" videos, which show the potential danger of following this kind of DIY instructions. Take a look at this one.
Electricity can be very dangerous, so please don't put yourself at risk. The internet is a great resource but it's no substitute for a competent, trained professional who knows how to get the job done properly and safely.
|Posted on August 7, 2013 at 3:12 PM||comments (0)|
One of the more common problems I - and I'm sure most electricians - come across is loose or detached connections inside sockets, switches, etc, something which often isn't noticed until a light or socket fails.
A loose connection might not seem like a big deal but think about this; a poor connection means increased resistance. Increased resistance generates heat which causes deterioration or damage to the wiring, resulting in it failing or, in serious cases, causing a fire. I've seen more than one instance where the wiring inside a socket has been very badly charred.
Also, if the bad connection is in a ring main, that could mean more current flowing through the cables than they are rated to carry. That can result in an overload, another serious fire risk.
You might have a light which flickers when it's turned on or you may hear a faint crackling sound from inside a socket or switch, or possibly even see a spark; that's called arcing and is a good indicator that there's a loose connection.
As always, my advice is if you're in any doubt, consult a qualified electrician. Better safe than sorry.
|Posted on April 15, 2013 at 9:56 AM||comments (2)|
Consider something for a moment; you have an MOT carried out on your car every year, your boiler serviced every year and so on. When was the last time you had your electrical wiring inspected?
Electrical wiring deteriorates with time and use, which can give rise to problems and potential safety hazards.
A wiring inspection, or Electrical Installation Condition Report to give it its full name, is like an MOT for your wiring and can help to identify issues before they become serious faults.
It's recommended that the electrical installation in a dwelling is inspected every 10 years at most, or when the property is sold.
At a typical cost of £100-150, depending on the size of the property, an inspection might sound like a costly exercise but when you consider that putting right a serious fault could cost several hundred pounds, an inspection that could well prevent that fault from developing starts to look like the cheaper option, to say nothing of the peace of mind you gain from knowing the electrical wiring in your home is safe.
|Posted on March 19, 2013 at 5:40 PM||comments (8)|
With the Easter Bank Holiday weekend approaching, a time when many people tackle DIY projects, I thought it would be a good idea to offer some advice about cables buried in walls.Supposing, for instance, that you're putting up some new shelves; you're going to need to drill into the wall to fix them up. Be very careful to make sure you're clear of any cables that might be running inside the wall.
As a general rule, buried cables run vertically into sockets or switches on the wall, usually coming down the wall, so make sure you don't drill directly above a plug socket or a switch.
That's only a general rule, though; I've seen far too many examples of cables being run outside these "safe zones." As an example, a friend of mine who's a non-electrical tradesman had to call me out a few days ago after he drilled through a cable that was running up the wall at an angle. He was a very lucky man - the main supply fuse blew before he suffered what could have been a fatal shock.
My advice to you is, check carefully before you drill into a wall. The best option is to check with a cable detector, just in case there are any cables in unexpected places. They only cost about £15, which is nothing compared to your life and safety.
Remember - Electricity Can Kill.
|Posted on February 26, 2013 at 11:55 AM||comments (116)|
|Posted on October 9, 2012 at 11:23 AM||comments (2)|
I was called out recently, to a client who was having trouble with lightbulbs which kept failing or, in a couple of cases, falling out of the fitting, leaving the base in the light.
It turned out that the bulbs in question were too high a rating for the fitting, and this got me thinking. How many people actually check when they change a bulb, that it's the correct rating for the light?
I know it doesn't sound like a big deal but consider this; lightbulbs get hot (anyone who's ever touched one when it's on knows this) and the higher their rating, the hotter they get. That heat needs space to dissipate and if the light fitting is a smaller design, then there's nowhere for the heat to go. That's when problems arise.
Excess heat from a bulb that's too high a rating for the fitting can cause the bulbs to fail prematurely, or even damage the light fitting itself, as happened to the client concerned.
In extreme cases, this can even result in a fire risk. I've seen a couple of instances where very powerful bulbs have been placed inside small fabric lampshades and have ended up burning holes in the shades.
Always check that the bulb you're putting in a light is the correct rating for the fitting. The rating is normally labelled on the fitting, or inside the lampshade. If it's a new light fitting that's being installed, then the bulb rating should also be printed on the packaging.
It sounds obvious, I know, but I've seen this kind of problem more than once, and I think a lot of people just don't realise the possible dangers that can arise.
|Posted on June 24, 2012 at 4:53 AM||comments (9)|
Do you have a fuse board that has circuit-breakers?
Most breakers trip into the down position, and are reactivated by simply pushing the switch up again. However, in some makes of breaker, if you just push the switch up it simply falls back down. To reactivate this type of breaker, the switch has to be pushed fully downwards before pushing it back up.
People are frequently known to call an electrician because they don't know about this; there are some firms out there who will charge a call-out of £75 + VAT just to reactivate a breaker, so try pushing the switch down then up, before you call someone in.
This being said, if you reactivate a breaker and it trips out again straight away, then you should definitely consult a qualified electrician.